Engineer Nejisaurus VAX PZ-75 pliers

Specifications 

・Corresponding screw head diameter: φ3 to 9.5mm

・Tate groove hardness: HRC60±2

・Cutting ability: copper wire cutting blade/VVF wire (2.6mm x 3C), IV wire (22mm²), wire cutting blade/soft iron wire

(Φ2.5mm), stainless steel wire (φ1.6mm)

・Crimping adaptation range: 1.25 to 3.5mm²

・Total length: 205mm

・Blade length: 20mm

・Tip length: 38mm

・Tip width: 27mm

・Tip thickness: 14mm

・Grip width: 53mm

・Weight: 297g

・Material: Main body/carbon steel, grip/elastomer

Made in Japan 

please note pliers are not VDE rated. 

●With a sharp shear blade, you can easily cut VVFφ2.6 x 3 cores.

●You can grab crushed screws and rusty screws with the head groove at the tip and turn them.

●The unique tip shape also supports low-headed screws (truss screws).

●Because it can be grasped vertically with the tip, you can work even in narrow spaces.

●By using two types of cutting blades, it prevents deterioration and damage to the cutting blade.

●Offset The head groove can also grab and turn the crushed screws on the wall.

●In addition, you can reliably grasp thin tie bands, etc.

●The round side groove adheres closely to the plate and nuts to hold it reliably.

●With simple crimping function.